All our LED lights are DLC listed with energy saving that are designed to replace incandescent, fluorescent, CFL, metal halide, high pressure sodium and halogen lights in your office, facility or business. They will reduce your energy consumption by at least 50%, and as much as 80%, depending on the light you choose and the light we are replacing. With LEDs lasting up to 100,000 hours, we can also reduce your maintenance on your lighting.
LEDs are comprised of 3 main components: the LED’s (the chip set that produces light), the driver (converts AC to DC) and the heat sink (to keep everything cool). LEDs take DC power from the driver and create light. The heat sink captures heat from the LEDs and the drivers. Although LEDs produce significantly less heat than the light fixture we have been used to over the past century, the heat they produce must be managed. The better this is done, the longer the life of the product.
LED’s also performs the job of converting electricity to light more efficiently than other light sources, that is why we can replace a 400W metal halide fixture with a LED 100W solution.
There are many benefits. Here is a list of a few:
a. An immediate reduction in your electricity bill.
b. Less heat. LED fixtures are extremely efficient converting electricity into light.
c. LED fixture last a very long time, typically 50,000 to 100,000 hours.
d. They are virtually indestructible.
e. They do not contain mercury or other hazardous materials
f. Highly recyclable – with no hazardous parts, you can easily reclaim most of the parts in an environmentally safe way.
It all depends what you are converting. Incandescent to LED, fluorescent to LED, Metal Halide to LED. And this answer will change over time as LED Lights become more efficient and their lumens/watt get better. For now, you can expect at least a savings of 50% when you convert fluorescent lights to LED and 70% or more when you convert Metal Halide or High Pressure Sodium to LED.
Yes and No. First, not all LEDs are dimmable. The driver must be designed to allow dimming. Secondly, you must purchase the right type of dimmer. Most retail stores now carry dimmers specifically designed for LED fixture. Please note, if you purchase a non-dimmable LED fixture and try to dim it, it will cause the fixture to fail and also void the warranty.
Some of our industrial and commercial LED fixtures (high bays, floods, area lighting) work with a 0-10V dimming system. 0-10V dimming requires special wiring and a special type of dimmer.
The two most common types of dimming is: 0-10V low voltage and Triac dimming.
They shouldn’t. LED fixture should not contain mercury or any other hazardous metals or chemicals. CFL’s and fluorescent do contain a very small amount of mercury that needs to be disposed of correctly. So when your LED fixture eventually stops to work, you don’t have to worry about costly or special disposal procedures.
Color temperature for light fixture is measured on the Kelvin scale. LED fixture come in a variety of colors, but the most common are in a range from 2700 Kelvin to 7500 Kelvin. The unfortunate thing is that the only consistent measurement is the Kelvin scale, Many manufacturers like to use terms like Day White, Natural White, Warm White and Cool White, but there is not a standard that defines a Kelvin temperature to associate a color temperature with those terms. The warmer the light, the more yellow tones, the cooler the light, there are more blue tones.
In this example, we have used terms to reflect what we believe to be the right relationship to Kelvin color temperatures.
2700 – 3200: Warm White
4000 – 4500: Natural White
5000 – 5500: Day White
6500 – 7500: Cool White
Its important to note: at home we use Warm White fixture, in the office we use Natural White and in the Warehouse we use Day White. We rarely use or even sell Cool White LEDs.
Yes. Some fixture are designed with water-proof fittings. Others need to be kept in a water-tight fixture. Read all instructions and manuals before using a LED fixture outdoors.
The specification you need to check for is IP Rating. A fixture or fixture IP65 or greater is considered acceptable to work in a wet environment.
Yes. They will fade as the fixture gets near the end of its normal operating life. But it is very gradual and hardly noticeable. This is called Lumen Degradation and is denoted on the website as L70. L70 is the amount of time the light takes to get to 70% of the initial lumen output.
There is a lot that goes into answering this question. DesignLights Consortium has indicated in their specifications that you need at least 10,000 lumens to replace a 400W Metal Halide. Some other factors come into play, like surface reflectiion, obstructions and other source of light, such as natural light sources coming into the building.
We replace indoor Metal Halide with 15,000 to 21,000 lumens of LED.
We replace outdoor Metal Halide with 12,000 to 21,000 lumens of LED.
LED Lighting Supply designs light solutions. We are product agnostic, we will select the best product that meets your needs. So we have the ability to replace 400W Metal Halide with 10,000 lumens up to 30,000 lumens. We do find that you need more lumens indoors to do a proper replacement than you do outdoors. A lighting photometric analysis will determine how much you need to create the proper foot candles.
Always buy based on lumens, watts is a number that is used to determine how much energy it takes to produce those lumens. It is important to pay attention to lumens per watt, or lm/w. The higher the number, the less energy you will need to produce the light. You will notice that some lights take less energy to produce the same amount of light, and this is something you should watch for. Typically, the higher the ratio, the better.
Almost always, it is the driver. That is why it is important to know who makes the driver in the LED fixture or retrofit you purchase. Brand names like Meanwell, Inventronics and Philips are great. A LED product with a 1 or 2 year warranty is an indication of how good the driver or product is. Typically a good driver should last more than 50,000 hours.
Heat. Heat is the enemy of electronics, the hotter it is, the shorter the light. However, with good design, you can create a light or fixture that can withstand some high heat environments. Typically a fixture or fixture with an external driver will last longer than an integrated fixture that has the LEDs and driver as one unit.
CRI is Color Rendering Index. It is a measurement of the quality of light. Where as lumens is a measurement of the quantity of light, CRI is the measurement of quality. It is a scale between 0 and 100. 0 is bad, 100 is great. LED’s typically are in the 70-95 range. The higher the CRI, the more expensive the LED chip, and therefore the more expensive the product itself.